Forum Post: RE: the problems occur in Memory.cmd when building in CCS
[quote]When building the project named testdpu_C6678 in CCS , the problem is below: [/quote]Is this project a sample project or custom one?Regards,Gautam
View ArticleForum Post: RE: the problems occur in Memory.cmd when building in CCS
[quote]When building the project named testdpu_C6678 in CCS , the problem is below: [/quote]Is this project a sample project or custom one?Regards,Gautam
View ArticleForum Post: RE: can not find CCS_Scripting_Com.dll
Hi Lin,With a registered copy of CCSv3.1, you should be able to use Update Advisor download CCStudio Scripting. This is done from Help->Update Advisor->Check for Updates from the CCS menu line.If...
View ArticleForum Post: RE: CCSv5.2.0 Install Error in action ExecuteAction - error "not...
hello Lisa, My problem:(Installation path is in English, no special characters.Please help me,Thank you!)Error in action ExecuteActionError in action ExecuteActionError in action ExecuteActionError...
View ArticleForum Post: RE: Error updating CCS
No, but it continues to work without problems so far!Regards,Anup
View ArticleForum Post: RE: LInker problems
Thanks Chester. Commenting it out of F2806x_Examples.h fixed the problem. Interestingly, it also appeared to have no affect on the DELAY_US function.
View ArticleForum Post: RE: Lauterbach power debug interface / usb2
Hi CW,To my understanding it doesnt support connecting through power debug interface. Anyways, I am movingthis thread to the CCS forum for someone to confirm it for youRegards,Praveen
View ArticleForum Post: System Analyzer and UIA: profiling a feature across 2 cores
Hello,I am using code composer 5.4 with system analyzer (UIA target): uia_1_00_03_25 and SYS/BIOS 6.32.05.54. I am trying to measure the timing a certain feature takes, The feature starts in one core...
View ArticleClik here to view.
Forum Post: RE: GUI Composer Issue
Dear PatrickI also have some question about GUI composer.My target is TMS320F28335. I use CCS5.4. the emulator is XDS100V2. I want to observe 8 variables during the debug process. So I try the GUI...
View ArticleForum Post: RE: CCS5.4.0.00091_linux bios_mcsdk problem
Hi all!It seems that the problem hasn't been solved so far. Is it going to be fixed at all? By the way it is not always possible to switch from Linux to Windows or vise verse.
View ArticleForum Post: RE: Problems while installing ccs_setup_5.5.0.00077
Hi Sonali,First of all disable your anti-virus and firewall. Then, follow this link:http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/290318.aspxRegards,Gautam
View ArticleForum Post: RE: CCS5.3.0-Connecting to the Target
Hi Rama,Check the voltage levels on the board and compare them with the required voltages in schematics.Regards,Gautam
View ArticleForum Post: RFFT algorithm for 2811 Ti DSP using CCS 5.5.0
Hi!Through ControlSUITE I found RFFT algorithm for 2833 DSP.I would like to port this to a 2811 DSP and extract the necessary header files etc.The example source file contains the following...
View ArticleForum Post: RE: Uniflash command line execution handling errors
Hi,Uniflash command line is called within a Graphical User Interface. The GUI assumes that the command line tool present in the C:\ti\uniflashv3\ccs_base\scripting\examples\uniflash\cmdLine path.I...
View ArticleForum Post: RE: Assigning a variable to a F28069 GPIO pin
[quote]so doesn't 11.3MHz seem low[/quote]Aron, I recollect now the overhead with GPIO toggling is very high. The 11.3MHz figure you've observed above is a true value and also you can clearly notice...
View ArticleForum Post: RE: LDC1000 Webench coil design tool
Hi Sri,When I try to import the LDC1000 coil 21 I could not able to import it in my design. I get only the foot print of the 0603 component and not the foot print of the coil. Could you please send me...
View ArticleForum Post: RE: Installation of CCS 5.5
Hi,Try with offline setup. The above link seems to be down.Regards,Gautam
View ArticleForum Post: Problems with installing CCS v5.5.0.00077 - Unable to load...
I'm having problems with installing CCS v5.5.0.00077 on nWindows 7, 64-bit, on a local driveI've disabled virus software, and remove the existing c:/ti folder, and I'm running the on-line installer as...
View ArticleClik here to view.
Forum Post: ccs5.5 pro trace bug
hello:I baught a XDS560V2 PRO trace receiver from TI estore, I use it to trace data from C6678 EVM board.I set the receiver buffer size to 1GB,and when the buffer is full, it will show the trace info...
View Article