Following up on Ki's response. CCS 5.5 installer does not install System Analyzer if doing a custom install and installing only one or a combination of the following processor architectures:
- MSP430 Low Power MCUs
- C28x 32-bit Real-Time MCUs
- C5000 Ultra Low Power DSP
To get System Analyzer to install you must also select at least one Processor Architecture not in the list above.
If you have a CCS install with this issue you can apply the following patch instead or re-insalling CCS to get System Analyzer:
- From CCS->Help->Install New Software, Select "Add..".
- Enter any "Name" and the following "Location": http://software-dl.ti.com/ccs/non-esd/dvt/ccs5.5
- Select DVT from list of available software and navigate through the dialog to install
- When requested to Restart Code Composer Studio, select OK to do so
- Depending on your installation you may see an error after the above step (“An error has occurred. See error log for more details. Com/ti/dvt/util/logging/DvtLog”). If this occurs then please use Task Manager to kill CCStudio
- After restarting CCStudio System Analyzer will be available
Regards,
Imtaz.