Forum Post: RE: Cannot perform 32x32 multiply with full 64-bit result on C6713
Matt,Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages. Be sure to search those for helpful information and to browse for the...
View ArticleForum Post: RE: Sections defined in DSP280x_Header_nonBIOS.cmd are reported...
[quote user="Prasoon Srivastava54833"]I created a new project for TMS320F2808 on CCS Version: 5.3.0.00090, added few files and compiled the project. For some reason the linker in not seeing sections...
View ArticleClik here to view.
Forum Post: Debug assertion Error
Hi ,Thank you for your reply.Maybe we will wait new CCS release.I build project have some error.I project locate on c:\test_projI use CCS 5.3.0.00090 only build load Hello project get below error...
View ArticleForum Post: RE: Can Not Connect EVM6670LE using XDS560V2 Emulator
Alright... I've checked the power connector. From top to bottom it has 0V, 3.3V, 0.68V, and 5V. The Da Vinci IC is a bit warm. The USB Female Plug on the board has power voltage 5V and 0V (I couldn't...
View ArticleForum Post: RE: Error initializing emulator: (Error -1006 @ 0x0)
The log is useful, I'll have the engineering team look at it in the morning tomorrow.Few other things to try:-Try using a new workspace-clean out old launch configurations and target cache files:...
View ArticleForum Post: RE: How to support CCS5.4 on Windows Server 2008 R2
Hi,Did you try running CCS in compatibility mode?Regards,Gautam
View ArticleForum Post: RE: Can not find "TMS320DM8168" item in the Device Variant of New...
Hi,Did you update the software? Try custom updating the software.Regards,Gautam
View ArticleForum Post: RE: CCS5.2.1.00018 installation failed!!!
Hi,I am really sorry for not using v5.4. I am trying with the existing version because i had installed that on the same machine few months back.I will check with v5.4 and will update you the...
View ArticleForum Post: RE: Too long to load register in CCS-5.4
Sorry, my mistake. I see it now.I also found some more details. My previous comment that the issues just happen on XDS100v2 is incorrect. It is most noticeable because it is the slowest emulator. I...
View ArticleForum Post: RE: Connect via a USB port for MSP430 using Code Composer 4
I forgot to mention ... I had to save the .c/.h files to another subdir -> delete the entire Project -> Create a new Project -> move the .c/.h files back into the project. Without those...
View ArticleForum Post: RE: Debug assertion Error
Please see this forum thread.Thanks and regards,-George
View ArticleForum Post: RE: Code Composer displays error: errors occurred while reading...
Hi Brent,I recall some similar issues awhile back. I believe the cause was that the TEMP and TMP environment variables were not defined. Could you check if they are defined to a valid location?Thankski
View ArticleForum Post: RE: Unable to build gpioLEDBlink example project for BeagleBone...
In order to run the gpioLEDBlink example, I had to do the following changes to the imported project:to point the includes in "Project Properties/ARM Linker/File Search Path" to the "release" path, ex.:...
View ArticleForum Post: RE: program will not fit into available memory
I have loaded gel file in every core and it works well.Thanks a lot for your help.
View ArticleForum Post: RE: XML update for CCS V4.2.5???
Hi Wonsoo,The problem is that loading CCSV5.4 brings in bios 5_42_01_09. My code uses bios 5_41_10_36 . I cannot effectively remove 42_01_09 by uninstalling the BIOS and then installing 10_36. I...
View ArticleForum Post: RE: How to support CCS5.4 on Windows Server 2008 R2
Thanks for your help.CCS could be startup, create a project and build successfully. The main issue is XDC tools. Attached the install log.I'm build SysLink using XDC tools and the errinfo as...
View ArticleForum Post: RE: How to trace bl_startup_ccs.s in boot_serial example...
Thanks you, Chester, I'll try later, I'm very appreciate for you help :-)
View ArticleForum Post: RE: Cannot perform 32x32 multiply with full 64-bit result on C6713
@Archeologist,Matt mentioned compiler versions 5.1 and 6.0.8.@George,Should the _mpyidll intrinsic show up for -mv6700 also? Or is there a different intrinsic for the C6713 that Matt is using? The...
View ArticleForum Post: RE: LM 5022 based SEPIC converter
Thnx Howard for your prompt reply.Can we add these power components into database of WEBENCH?rgds
View Article