Forum Post: RE: Optimization level gives Data verification failed at address...
Hello,It could be that disabling optimization impacted your code allocation in memory. My first question is if 0x10000 is a valid, writable memory region on your target and if the debugger memory map...
View ArticleForum Post: RE: Communicating with standard io using DSS
Hello Omar,[quote user="Omar Mokhtar"]Simply, How can i interact with the target standard IO in dss like i do it in the console of code composer studio ?[/quote]DSS doesn't quite have level of support....
View ArticleForum Post: Two XDS100v2 connected via USB 3.0
Hello,I faced into a problem when using two XDS100v2 which are connected to my PC via USB 3.0.To be concrete, our SAFETI-HSK-RM48 kit has two XDS100v2 build in which are connected via a TUSB8040A hub...
View ArticleForum Post: RE: Chip-Bead-Ferrite: Tina spice model
Jonathan9420,I do not believe that TINA can plot in this way. If you choose a Nyquist plot, you can get the relationship of the real and imaginary parts of the impedence.Britt
View ArticleForum Post: RE: sscanf problem in code composer studio
I don't have that exact device to test with but I tested with a different msp430 device family and got the expected result. Can you check what the stack and heap size are set to in your project...
View ArticleForum Post: RE: compiler warnings
Sorry for confusing the issue, I meant "hal.h" not "hal.c" as I wrote; it's the .h file where the function is that I'm modifying.Just to be clear on this, are you saying that ANY file that I modify...
View ArticleForum Post: RE: Command-line error: cannot open command file 1 catastrophic...
I think I found my problem...apparently, i didn't fully uninstall CCS5 before reinstalling CCS6, though the uninstaller is no longer visible in control panel. Â I was opening the old version when i used...
View ArticleForum Post: Selecting Project/Examples terminates CCSv6.0 in WinXP
How do I fix CCSv6.0 in Windows XP from terminating when Examples is selected under Project. Â The Eclipse log files is attached. Â (Please visit the site to view this file)Â
View ArticleForum Post: RE: GETTING TIME OUT ERROR WHILE DEBUGGING C Project USING...
[quote user="Vishal 118"]Â Â Â If you know anything else which may create problem in debugging then please share.[/quote]What you need to check is if the gdbserver that is being used on the target is the...
View ArticleForum Post: RE: Compile time in CCS 5.5 more than double
[quote user="ReinierC"]I can try this, but I do feel its quite pointless to upgrade to CCS 5.5, only to downgrade the compiler version.[/quote]the compiler version is pretty separate from the CCS...
View ArticleForum Post: RE: OPA2320 SPICE MODEL ERROR
You can try attached file which may fix all of the issues. If not I defer to John Miller for further investigation.
View ArticleForum Post: RE: Stellaris and FreeRTOS support
Hello Rohit,I'm sorry but I haven't been working with CCS or LuminaryMicro chips in last 3 years. I don't even have the build environment settled up. I switched to another platform and RTOS a long time...
View ArticleForum Post: RE: Communicating with standard io using DSS
The input support is built into the console in CCS, not DSS. Hence when running from the command-line, that direct support is lost. So basically, there is no direct DSS API to support what you are...
View ArticleForum Post: RE: blackhawk XDS100v2 for AM3352 : what target configuration
[quote user="trichet christophe"]the list : is "TI XDS100 v2 USB emulator" the correct choice for a Blackhawk jtag device ( http://www.blackhawk-dsp.com/products/USB100v2ARM.aspx)[/quote]Yes it is. All...
View ArticleForum Post: RE: TPS2818
Fenny,We currently do not have a simulation model available for the TPS2818. We do have models available for the UCC27323, UCC27423, and UCC27518 if any of those devices could meet your needs.Britt
View ArticleForum Post: RE: Reading back from internal Flash of TMS320F28335
Hi Shraddha,You can use the Memory Save feature in the Memory view to read and save the contents of a memory region to a file on your PC.You can also use the Fill Memory feature in the Memory view to...
View ArticleForum Post: RE: Bug with Beagle black debug configuration in CCS6.0
Hi Priti,Can you reproduce while generating a debug server log and zip/attach it to this thread?http://processors.wiki.ti.com/index.php/Troubleshooting_CCSv6#Debug_Server_LoggingThankski
View ArticleForum Post: RE: HELP PLEASE!
Liam,The Excel spreadsheet used the equations in the document using C1 and F.Here is a quick one that I just made.Britt(Please visit the site to view this file)
View ArticleForum Post: TMS570LC4357 PCR1 register values in CCS 5.5
Hi CCS team,I use CCS 5.5 to debug design based on TMS570LC4357. I have noticed that the register values of PCR1 register PPSExMstID_L and PPSExMstID_H (x=0..7) are swapped in the register view.The...
View ArticleForum Post: RE: CCSv5.5 under linux cannot select compiler 4.2.5
If the project was created as a RTSC project, dependency on RTSC cannot be removed. It looks like the project has a RTSC cfg file (give the build message in the last post) so you should not try to...
View Article