Forum Post: Can CCS5.5 be configured to assert a system reset before loading...
Is there any way to configure CCS 5.5 to assert a system reset before loading a program?The use case is downloading a SYS/BIOS program to a AM335x starter kit using the built in XDS100v2. SYS/BIOS...
View ArticleForum Post: Calculators and Other Utilities is down.
Dear TI-er.A few tool is down.http://www.ti.com/adc/docs/midlevel.tsp?contentId=23657VOLT-DIVIDER-CALC, PARALLELRESCALC, PARALLELRES1CALC, etc...plz help me.
View ArticleForum Post: RE: TMS570LS31USB and CCSv5
This is no exactly what I meant, I know where this window located. The problem is that when I run the program on a microcontroller, nothing happens. In the registers window are not shown the registers,...
View ArticleForum Post: RE: #10010 and #10056 erorrs in ALL example programs
Thanks to everyone who responded.I had the correct Tivaware installed.It was about a week ago that I reported the problem, and I do not recall why the projects were not appearing in the work space...
View ArticleForum Post: RE: CCSv6 Beta3 64bit gentoo install problem
Have you run the dependency checker on your Linux system (check here), and did it find anything missing?
View ArticleForum Post: Daisy Chain processors in CCS5
Hi everyone,I'm working with a custom made board that has 5 different MCUs that are dasiy chained together. The main MCU is a TMS320F28034 and then there are four TMS320F28027s connected after that....
View ArticleForum Post: RE: Failed CCS5 Installation on Windows 8
Hi Mike,I hope its a offline setup and you've downloaded the complete installation. There is a possibility that the setup might be corrupted. Try downloading the setup file again and install. Do keep...
View ArticleForum Post: RE: Can't access Graphs in CCS 5.2.1
Nilesh,Were you able to resolve this issue? If not can you provide more info on the steps you're taking and where you seeing the error (maybe a screenshot).Regards,Imtaz.
View ArticleForum Post: RE: xds560, Stop mode debug Linux kernel, ccstudio5.5 on ubuntu...
Yes, that is what I was thinking could be the source of the problem you were having. In this case it seems you are already assigning the symbols to the correct core.Sorry about the noise.Rafael
View ArticleForum Post: RE: tps54120 spice files
Hi Robyn,Typically, a _TRANS model is useful for time stepped transient analysis. For most typical DC/DC converter macro models, the transient is ONLY good for transient analysis. That is, that to do...
View ArticleForum Post: RE: CCS v3.3, Windows 7 UNC/Network access problems
Ki, Thank you. I solved the problem. We can't have administrator rights in our individual accounts on the domain, so we have a special administrator account that is only valid for a short time...
View ArticleForum Post: RE: how to build msp430 programs in linux
This appears to be about 2 and a half years late - but CCS 5 will run on Linux - but only on 32 bit systems AND many of the examples were never ported to Linux. So you get things like#include...
View ArticleForum Post: RE: What symbol should I use in rhino for C++ member functions?
Thanks for the link! I am going to have to put this effort on hold for a while, as I have been given a new priority that does not require this knowledge of the ofd6 xml output, but I will post back...
View ArticleForum Post: RE: LM5122 Tina-TI (Transient Model) does not work?
Hi Paul,Yes, this model can be used in Slave mode. Please find attached a TINA-TI test bench that provides this functionality.(Please visit the site to view this file)Let me know if you have any...
View ArticleForum Post: RE: CCSv6 Beta3 64bit gentoo install problem
I ran the dependency checker and here is the output:ajit@rog /tmp $ ./check_depends.sh Installed versions of glibc and glibcxx: GLIBC_2.18, N/ARequired versions of glibc and glibcxx: GLIBC_2.7,...
View ArticleForum Post: RE: CCS3.3 Cannot find BIOS header files
One last thing to try:manually re-register the project management component:> regsvr32 C:\CCStudio_v3.3\cc\bin\projsvr.dllre-register the build tools:> regsvr32...
View ArticleForum Post: RE: In C6678 DSP, my algorithm never converges like it does in...
Thanks George. That is definitely a helpful article!Unfortunately, making both of those changes did not help my performance.I've also tried to switch back and forth between double & float, to see...
View ArticleForum Post: RE: A problem opening a file with fopen for a Digital Signature
Mario,Are you running Windows 7 with UAC enabled? If so, the code you sent tries to write to the root directory, but usually UAC prevents writing to this area without admin privileges.Try to change the...
View ArticleForum Post: RE: Webench Export to cad option not present.
Hello,We should have the Export enabled for the TPS43060, TPS43061, and TPS55330 by Jan 29th.Thanks,Surinder
View ArticleForum Post: RE: Failed CCS5 Installation on Windows 8
Thanks. I am downloading the file now and will try it when it finishes.Mike
View Article