Hi John,
Thank you so much for your help. The first problem starts when you try to debug the app. The error dialog which shows the device is in reset, is modal, so you cannot run any scripts to take the device out of reset. All you can do is click cancel, which exits the debugger.
I disabled all the debug "Auto Run Options". Now when I launch the debugger, the C646X is connected and suspended. I then connect the CortexA15_0 and run the RESET scripts for reset_miniC64, reset_ipu_cortexM4_RTOS_board and reset_ipu_cortexM4_SIMCOP_board. I can run the app.
Now the app I'm running is a simple Hello World example running on SYS/BIOS (Created with TI Resource Explorer - SYS/BIOS, ARM, OMAP5432_UEVM, Generic Example, Hello Example). When I run the app, I do not get any output. When I halt the app, it is aways in the Timer_checkFreq function (Timer.c) at a line that has the following comments above it:
/* Wait for 'TIMERCOUNTS' timer counts to elapse */
Thank you again for your help
Regards,
John