I managed to build the same example for the Tesa (C6000 DSP), but when I launch the debugger, I get an error message:
"Error connecting to the target:
(Error -1180 @ 0x0)
Device is held in reset. Take the device out of reset, and
retry the operation.
(Emulation package 5.1.73.0)
My guess is that the CortexA15 processors have to release the CortexM4 from reset, but I'm not sure how to do this. I'm running Linux V3.8 on the CortexA15 processors.
Is there no way to do this with a GEL file?