Ricky,
first of all many thanks to you and the TI team for the excellent support you offer to your user.
Secondly, sorry for answering so late. But as written before, I encounter this problem at home only. And as you may imagine, I very seldemly have the FET-Deubug-Interface and our host at home. So testing is very rare.
I did as you asked me. Please note that the log file <lmlog.txt> was located in C:\documents and settings\<username\ on my XP system.
Atteched two log files:
1. <lmlog (network enabled).txt> which shows the problem.
2. <lmlog (network disabled).txt> which is ok.
In the first log file I marked the time during which the system was displaying "Launching PrejectName: (100%)". It is steps 3A to 3G which take exactly 60 seconds to complete! The same steps take about 0 seconds, in case the network is disabled.
I also made tests with firewall disabled. There was no change to the configuration with firewall enabled.
Hope this helps other users as well. As written before, I very seldemly work at home and when I do, it is acceptable to me to disable the network.
thanks again,
Paul