Dear all,
I have the similar problem with yours! I follow the steps in the DM814x AM387x PSP Flashing Tools Guide.pdf in my custom board and have no problems until i load nand-flash-writer.out ! when i load this file ,i got the following error,
CortexA8: Trouble Setting Breakpoint with the Action "Process CIO" at 0x8000a3ac: (Error -1066 @ 0x333C) Unable to set requested breakpoint in memory. Verify that the breakpoint address is in writable memory. (Emulation package 5.1.73.0)
CortexA8: Breakpoint Manager: Retrying with a AET breakpoint
CortexA8: Trouble Setting Breakpoint with the Action "Terminate Program Execution" at 0x8000a99c: (Error -1066 @ 0x333C) Unable to set requested breakpoint in memory. Verify that the breakpoint address is in writable memory. (Emulation package 5.1.73.0)
CortexA8: Breakpoint Manager: Retrying with a AET breakpoint
CortexA8: Trouble Setting Breakpoint with the Action "Finish Auto Run" at 0x80007430: (Error -1066 @ 0x333C) Unable to set requested breakpoint in memory. Verify that the breakpoint address is in writable memory. (Emulation package 5.1.73.0)
CS_DAP_DebugSS: Error: (Error -242 @ 0x0) A router subpath could not be accessed. The board configuration file is probably incorrect. (Emulation package 0.0.0.0)
Is there anything i need to modify about the gel files of PG.1x and PG 2.x。
Thank you i n advance!