Hi Kevin-san,
Thank you for your prompt reply.
I can simulate at Vin=9.0V to 19V , Vout=6.8V , Iout=5.0A (Buck mode).
(please refer to attached file.)
What is reason that the parameter at Vin=9.0V to 19V , Vout=6.0V , Iout=5.0A isn't simulated ?
[your question]
What is the advantage for a Buck only design?
=>My customer would like to use LM5118 with changing the output voltage (6.0V to 15V).
So, they have simulated at the following parameters.
- Vin=9V to 19V , Vout=6V , Iout=5A : Sim NG
- Vin=9V to 19V , Vout=9V , Iout=5A : Sim OK
- Vin=9V to 19V , Vout=15V . Iout=5A :Sim OK
Regards,
Kanemaru