Hi Stefan,
I used the netlist that you provided and created the .TSM file in TINA-TI ( Ver. 9.3.50.47 SF) with no problem.
Attached is the TSM file for that part. You can ainsert it to your schematic as a macro.
Regards,
Arash
Hi Stefan,
I used the netlist that you provided and created the .TSM file in TINA-TI ( Ver. 9.3.50.47 SF) with no problem.
Attached is the TSM file for that part. You can ainsert it to your schematic as a macro.
Regards,
Arash