Hi
CCSv6.0.0.00190, C6472, XDC 3.30.1.25_core, IPC 3.20.0.06, NDK 2.23.2.03, SYSBIOS 6.40.1.15, UIA 2.0.0.28 and XDAIS 7.10.0.06, CGT 7.4.8
(Please visit the site to view this file)
Not all cores run when I select the group and then select the run button. This only happens after you let CCS load the cores after a successful compile. Here are the steps
1) Launch XDS560 emulator
2) Select all cores
3) Group the cores (not a sync group). This creates a "Group 1" tag.
4) Connect to all cores
5) Load a program and run
6) stop all cores (by highlighting "Group 1" in the debug window and then select the suspend button)
7) recompile code
8) when CCS asks "Do you want to reload this file?", say OK. CCS loads cores
9) when loading is complete, run cores
Very frequently you'll find that one of the cores does not run. You can highlight it and then select run and it will start.
If at step 8 you select NO, then if you manually load the cores, and "Group 1" is still selected, the RUN button will always work.
Cheers2u