I'm running CCS in Ubuntu 12.04LTS in a Parallels VM on my Mac Book Pro trying to connect to an ARM Cortex R on the TI motor dev kit DRV8301-RM48-KIT.
When I try to debug with the emulator, I get ...
IcePick: Error initializing emulator: (Error -2083 @ 0x0) Unable to communicate with the emulator. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.232.0)
When I open up the configuration file and test the connection, I get the following error message at the end of this post.
My Setup:
Spectrum Digital XDS200 USB
CCS 5.5.0.00077
OSX 10.9.2
Parallels 9.0.24217 (latest)
Can anyone suggest what to do to get the XDS200 connected and working on my platform?
Has anyone used this platform (Ubuntu/Parallels/Mac)?
Thanks,
Mike
[Start]
Execute the command: %ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -S integrity
[Result]
-----[Print the board config pathname(s)]------------------------------------
/home/michael/.TI/1524211065/0/0/BrdDat/ testBoard.dat
-----[Print the reset-command software log-file]-----------------------------
This utility has selected a 560/2xx-class product.
This utility will load the program 'xds2xxu.out'. E_RPCENV_IO_ERROR(-6) No connection
Failed to open i/o connection (xds2xxu:0)
An error occurred while soft opening the controller.
-----[An error has occurred and this utility has aborted]--------------------
This error is generated by TI's USCIF driver or utilities.
The value is '-250' (0xffffff06).
The title is 'SC_ERR_ECOM_EMUNAME'.
The explanation is: An attempt to access the named emulator via USCIF ECOM has failed.
[End]