I purchased AM1808 experimenters kit from logic pd. When I attempted to run the led dip test program I am getting the following error. 
I used the Blackhawk USB100V2 model D provided by the zoom kit from logicpd. I followed all the instructions given in the user manual. However I was able to run led dip test program using the on board XDS100 emulator.
I noticed that the above shown error remains unchanged even if the board is powered off or even if blackhawk is disconnected from the host.
I am using code composer studio version 4.2 provided along with the logic pd kit.
Blackhawk is showing all right in the device manager. When ever it is connected.
What might be the problem? Is my blackhawk damaged.