Forum Post: RE: EXPKITOMAPL138_ARM.gel script from CCS 5.5 reports errors writing to target

[quote user="Ki-Soo Lee"]Note that the XDS100v1 does not support ARM. People who have tried to use the onboard XDS100v1 with the ARM9 of the L138 have run into various known issues. We don't really have a good workaround for it other than recommending using an external emulator that supports ARM9 (like XDS100v2)[/quote]Obtained a Spectrum Digital XDS100v2. With the Spectrum Digital XDS100v2 I am still getting the same error when trying to run the EXPKITOMAPL138_ARM.gel script:[quote]ARM9_0: Output:  Memory Map Cleared.
ARM9_0: Output:  ---------------------------------------------
ARM9_0: Output:  Memory Map Setup Complete.
ARM9_0: Output:  ---------------------------------------------
ARM9_0: Output:  Enabling Experimenter PSCs...
ARM9_0: Output:  PSC Enable Complete.
ARM9_0: Output:  ---------------------------------------------
ARM9_0: GEL: Error while executing OnTargetConnect(): Target failed to write 0x01C11138  at (*((unsigned int *) (0x01C11000+0x138))|=0x1) [EXPKITOMAPL138_ARM.gel:25]  at device_PLL0(0, 24, 1, 0, 1, 11, 5) [EXPKITOMAPL138_ARM.gel:405]  at Set_Core_300MHz() [EXPKITOMAPL138_ARM.gel:464]  at Core_300MHz_mDDR_150MHz() [EXPKITOMAPL138_ARM.gel:252]  at OnTargetConnect() .
ARM9_0: Trouble Writing Memory Block at 0xc3000000 on Page 0 of Length 0x7ff0: (Error -2030 @ 0xC0006) Internal error: Access to unknown or invalid register was requested. Restart the application. If error persists, please report the error. (Emulation package 5.1.402.0)
ARM9_0: GEL: File: C:\Documents and Settings\Mr_Halfword\workspace_v5_5_omap_L138\hello_EXPKITOMAPL138_ARM9\Debug\hello_EXPKITOMAPL138_ARM9.out: Load failed.
ARM9_0: Unable to terminate memory download: NULL buffer pointer at 0x320
ARM9_0: Error: (Error -1033 @ 0x3FF) Instruction bus is 'not ready'. Choose 'Abort' to try to abort the pending transaction. Choose 'Force' to try to force the bus ready state. (Emulation package 5.1.402.0) [/quote]The debug server log for this failure with CCS 5.5.0.00077 and the Spectrum Digital XDS100v2 is attached (Please visit the site to view this file)