THis is the output of SDConfigEx utility.
* Checking for available printer ports
** Checking for available USB ports
$$ XDS510USB connected on:
$$ EmuPortAddr=0x510
$$ EmuSerialNumber=S215500672012522
** Using emulation application from directory c:\ccstudio_v3.3pla\drivers
** Checking for a valid emulator/eZdsp
$$ You are connected to:
$$ EmuProductName=XDS510USB
$$ EmuPortAddr=0x510
$$ EmuPortMode=USB
$$ ProductId=510
$$ ProductVersion=84
** Using emulation application from directory c:\ccstudio_v3.3pla\drivers
** Checking for a valid emulator/eZdsp
$$ You are connected to:
$$ EmuProductName=XDS510USB
$$ EmuPortAddr=0x510
$$ EmuPortMode=USB
$$ ProductId=510
$$ ProductVersion=84
** Checking emulator/eZdsp scan connection
** Emulator Test **
$$ EmuProductName=XDS510USB
$$ EmuPortAddr=0x510
$$ EmuPortMode=USB
$$ ProductId=510
$$ ProductVersion=84
** Emulator Scan Test
-- Found JTAG IR length of 38
-- Found 1 JTAG device(s) in the scan chain
________________
Another issue I see is when I am trying to setup the Connection properties on the Code Composer Studio Setup, in the Connection Properties Tab -> Emulator I/O Port the value is currently at "XDS510 is at port 0x240.
However in the SCConfigEx
XDS510USB->Emu->Emulator POrt address is 0x510 by default and this cannot be changed.
What am I missing?
-Raj