HI when I connect my xds100v2 jtag with dm368 board and do test connection .it does the testing with out any error. on the other side if I connect the same jtag with dm3730 board and do test connection iam getting the following error: [Start] Execute the command: %ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity [Result] -----[Print the board config pathname(s)]------------------------------------ C:\Users\ABDUSA~1\AppData\Local\.TI\693494126\ 0\0\BrdDat\testBoard.dat -----[Print the reset-command software log-file]----------------------------- This utility has selected a 100- or 510-class product. This utility will load the adapter 'jioserdesusb.dll'. The library build date was 'Apr 1 2013'. The library build time was '23:55:08'. The library package version is '5.1.73.0'. The library component version is '35.34.40.0'. The controller does not use a programmable FPGA. An error occurred while hard opening the controller. -----[An error has occurred and this utility has aborted]-------------------- This error is generated by TI's USCIF driver or utilities. The value is '-180' (0xffffff4c). The title is 'SC_ERR_CTL_NO_TRG_POWER'. The explanation is: The controller has detected a target power loss. The user must turn-on or connect the power supply for the target. [End] thanks for the help in advance
↧