Hi,
I have a question about CCS connection.
In our system, Windows Compact 7 is runnging on the Cortex-A8(AM335x).
After booting up from SD card, WinCE7 is runnging and I want to be sure that
connecting to CCSv5 via XDS560v2 STM is allow or not.
Are we allow to connect the target to CCS while WinCE7 is running?
It seem that connecting is OK, but when executing OnTargetConnect()
the following error message have been displayed:
/////////////////////////////////////////////////////////////
CortxA8: Output: **** AM3358_SK Initialization is in progress ..........
CortxA8: Output: **** AM335x ALL PLL Config for OPP == OPP100 is in progress .........
CortxA8: GEL: Error while executing OnTargetConnect(): Target failed to
read memory at 0x44E10040 at (*((unsigned int *) (0x44E10000+0x40))>>22)
[AM335x_SK_1.2.gel:765] at GetInputClockFrequency()
[AM335x_SK_1.2.gel:836] at ARM_OPP100_Config()
[AM335x_SK_1.2.gel:756] at AM3358_SK_Initialization()
[AM335x_SK_1.2.gel:742] at OnTargetConnect() .
////////////////////////////////////////////////////////////
Is this because WinCE7 is running?
best regards,
g.f.