I did this setting, but it didn't help.
It always get stucked at this address:
403080e4: EAFFFFFE B 0x403080E4
and shows that error:
CortxA8: Trouble Removing Breakpoint with the Action "Finish Auto Run" at 0x4030118c: (Error -1066 @ 0x3332) Unable to set requested breakpoint in memory. Verify that the breakpoint address is in writable memory. (Emulation package 5.1.73.0)
To control one EtherCAT led, it's necessary to swith the appropriate GPIO pin. At first, the functional clock of GPIO module has to be switched on and i do module reset. Then I have to multiplex the right pin and to enable its output mode.
This is my program.
Maybe that helps you...?